Hot-to-Cold Injection Mold Making Experts

 

 

Most injection molders and injection mold makers are well familiar with the standard mold base, consisting of two halves, referred to as the A and B side of an injection mold.  The standard mold base will have two sides, and gates where the plastic will flow into the mold, through a ‘channel’ to get to the cavity or multiple cavities where the parts will mold.   This standard mold base is also called a cold runner mold.  

 

When the polymer resin hardens in the cavity to form the part, it hardens in the channel as well, which is also called the runner or the sprue.  In most cases, the runner is scrap, and will either be ground up and kept in raw material inventory as regrind to possibly be used in future jobs that will allow it, or it will simply be thrown away.  

 

Some injection molders grind up runners and keep the regrind material, but it can pile up and become an eyesore as most injection molding jobs require the use of 100% virgin material.  Even if it can be reused, it’s value is greatly diminished if it is stored in inventory.  Some molders feel it’s not worth the space on the floor to keep regrind material.  

 

If this runner is large, it can be a huge expense built into the part production, as the cost of the material is one of the biggest, if not the biggest expense of producing the part.   In some cases, especially for extremely small parts, the runner is larger than the part being produced.  In cases such as this it may be advisable to construct a hot runner mold.

 

A hot runner mold has a nozzle at each cavity supplying plastic directly into the cavity, rather than flowing through a ‘channel’, creating a runner.  This is a big saver if you can avoid creating a large runner for a high-volume production job.  

 

Hot to Cold Injection Mold

 

A hot runner mold may be worth the investment in cases of excess waste with high volume, although it is typically quite a bit more expensive than a cold runner mold.  Another option is called a hot-to-cold mold which is a hybrid of the two.  

 

Rather than have a nozzle at each cavity, there is a nozzle supplying a shortened runner system, supplying material to more than one cavity, thus greatly reducing your material cost.  A benefit of a hot-to-cold mold as opposed to a hot runner mold is the cost, it is generally less expensive as there are not as many nozzles and inner workings.  

 

A hot-to-cold mold is often the most economical option, providing significant cost savings with a reduced runner size, while not imposing the added cost burden of a full hot runner mold.  

Michiana Global Mold is experienced at constructing cold runner, hot runner, and hot-to-cold runner molds.  We have been in business for over 50 years, providing high performance tools with complex, precision designs.  Contact us today for a FREE design consultation and to learn more about how Michiana Global Mold can reduce your purchased injection mold costs.  

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s